2011 10 Volkswagen Golf1

When removal of the rear suspension is required on Volkswagen Golf MK VI, the bolts (8) securing the rear suspension subframe (7) to the vehicle body must be replaced with new ones before re-attachment.

(See page 2 for illustration supplied by Volkswagen AG).

The new bolts must be tightened to a torque setting of 90 Nm, plus an additional 90 degrees of rotation.

This procedure must be followed whenever the fixings are to be removed and replaced.

For any further information please contact the IAG Research Centre on (02) 9292 6840


2011 10 Volkswagen Golf2